ITEMS IN CART 0

You have no items in your shopping cart.

Subtotal: $0.00

Mounting Options

One of the most important features of all Docktail® Bars is flexibility.  Because every boat is different, each Docktail® Bar has several different mounting options. It can be mounted on most boats by choosing one of the 6 mounts we are compatible with using the pre drilled mounting holes on each bar. This gives you the flexibility to choose the mount that works best on your boat. Selection of the appropriate mount for you depends on the boat design and which location you want to mount your bar.

This line drawing shows the pre drilled holes that are compatible with the various mounting options listed below.

 

MOUNTS WE STOCK AND SELL ONLINE

Magma® "LeveLock"™ All-Angle Adjustable Fish Rod Holder Mount
Hardware Needed - 4 ¾ inch ¼ 20 Flathead Stainless Steel Screws (included in online purchase)

Seasucker® 4 ½” Suction Cup Mounts
We recommend 2 for this Application – Hardware Needed – 1 ¾ inch ¼ 20 Flathead Stainless Steel Screw per suction cup (included in online purchase)

The 4.5″ SeaSucker® vacuum cup can be installed using 1 ¾ inch ¼ 20 Flathead Stainless Steel Screw per suction cup. Although you can indeed mount the bar using 1 suction cup we recommend using 2 (4 ½”) suction cups for maximum stability. Using 1 suction cup allows the bar to rotate side to side. By using two suction mounts, you eliminate the possibility of a rotating motion. Lastly, remember the suction cups need to be suctioned to a smooth surface to work properly, for example, no non skid.

Magma® Square / Flat Rail Mount or Single Side Bulkhead Mount– Great for Pontoon Boats

Hardware Needed - 4 ¼-20, ¾” Flathead Stainless Steel screws with Nylon Lock Nuts (included in online purchase).

Additional fasteners are needed depending on rail size are not included and must be purchased separately.

Here are some other mounts that are compatible with the Docktail® Bar but sold separately at your local marine supplier or manufacturer

Magma® "Pow'rGrip™/LeveLock"™ 
Double Locking All-Angle Adjustable Rod Holder Mount 

Hardware Needed - 4 ¾ inch ¼ 20 Flathead Stainless Steel Screws

Magma® "Single" "LeveLock"™
Flush Deck Socket Mount

Hardware Needed –  4 ¾ inch ¼ 20 Flathead Stainless Steel Screws plus deck hardware

Magma® "Single" "LeveLock"™ 
Surface Deck Socket Mount

Hardware Needed –  4 ¾ inch ¼ 20 Flathead Stainless Steel Screws plus deck hardware

 
Join the Docktail® Bar Experience!