Pontoon & Tritoon Rail Cup Holders That Actually Hold Modern Drinkware
- Made in Florida, USA
- 90-day returns
- Fits almost any boat
- Your colors & name
- Free shipping over $150
Not every spot on a pontoon needs a full table. Sometimes you just need a place for drinks at the boarding gate, by the helm or next to the lounge. A rail cup holder clamps to your pontoon's top rail and gives drinks a home right where people are, without taking up seats, the tabletop or the deck.
What's Wrong With Most Pontoon Cup Holders
- Shallow rings that only catch the bottom of the cup
- Holders sized for a 12 oz can that won't take a 30 oz tumbler
- No room for a handle, so mugs and handled tumblers don't fit
- Clip-on plastic holders that rattle, crack and fade in the sun
- Nowhere to put your phone and sunglasses, so they end up on the seat
The Docktail Pontoon Cup Holder Caddy
The Pontoon Cup Holder Caddy is built to fix all of that:
- Holds what people actually bring. It takes 12 oz cans and bottles, insulated tumblers up to 30 oz (Tervis, YETI, RTIC, Ozark Trail) and mugs with handles.
- An enclosed center compartment for phones, sunglasses and sunscreen, with drainage holes so water doesn't pool.
- No tools. It clamps right onto the rail. Just tighten the knobs.
- Built for the water. It's cut from 3/8" King StarBoard with stainless steel fasteners.
- Compact. It's 18" long, 5" wide and 7" tall, and weighs 5 lbs.
Where to Put It on the Rail
| Where on the rail | Why it works |
|---|---|
| Boarding and exit gates | Drinks right where people come and go |
| Top of the swim ladder | A spot to grab a drink after a swim |
| Near the helm | The captain's drink and phone within reach |
| Next to the lounge seating | Every drink off the cushions and in a holder |
A lot of owners run a few caddies around the boat so everyone has a holder close by.
Will It Fit Your Rail?
The caddy ships for 1¼" pontoon rails, the most common size. We also make 1", 1⅜" and 1½" versions, and we can build custom sizes for anything else. It works on open rails and where the fence panels meet the underside of the rail.
Not sure what you have? Send us a photo of the spot and we'll tell you what fits.
Cup Holder Caddy or Rail Table?
- Get the caddy when you just need drinks and small essentials handled in more places around the boat.
- Get a rail table when you also want room for snacks, food and serving. The Butler and Utility clamp to the same rail. They add a 25" × 19" top with deep cup holders, a bump rail and non-slip marine decking, plus 3,000+ color combinations and your boat's name.
Lots of owners do both: a table at the stern gate and caddies at the bow and helm. See our rail-mounted pontoon table guide for how the tables fit, and our pontoon party ideas for setups.
Why Docktail Bar
- Made in Florida, USA, from marine-grade King StarBoard and stainless hardware
- Sized for today's drinkware, not yesterday's cans
- Fit help from real people: send a photo and we'll tell you what works
- 90-day returns, and free shipping over $150
Frequently Asked Questions
What rail size does the Pontoon Cup Holder Caddy fit?
It ships for 1¼" rails, the most common size. We also make 1", 1⅜" and 1½" versions, and custom sizes for anything else.
Does it work if my fence panels go right up to the rail?
Yes. It works on open rails and where the fencing meets the underside of the rail.
Do I need tools or drilling to install it?
No. It clamps onto the rail and tightens by hand with knobs.
Will it hold my 30 oz tumbler?
Yes. It fits tumblers up to 30 oz, including Tervis, YETI, RTIC and Ozark Trail, plus mugs with handles.
Where's the best place to mount it?
Boarding and exit gates, the top of the swim ladder, near the helm, or next to the lounge seating.
Should I get a cup holder caddy or a rail table?
Get the caddy for drinks and small items. Get a rail table if you also want room for food and serving. Many owners use both.
Cheers, and hope to sea you on the water!
Steve & Amber Fill, Docktail Bar

