Rod Holder Boat Tables & Cup Holders: Turn Any Rod Holder Into a Table
- Made in Florida, USA
- 90-day returns
- Fits almost any boat
- Your colors & name
- Free shipping over $150
If your boat has rod holders, it already has a place for a table. Our adjustable rod holder mount drops into any rod holder on the boat, at any angle, and sets the table level. You don't drill anything or give up deck space. When the rods come out, the table comes out too.
The rod holder lineup:
- Docktail Butler with Rod Holder Mount
- Docktail Butler with Rod Holder Mount – Midnight Series
- Docktail Utility with Rod Holder Mount
- Docktail Utility with Rod Holder Mount – Midnight Series
- Docktail Boat Table Caddy with Adjustable Rod Holder Mount
- Docktail Cup Holder Caddy with Rod Holder Mount
Every Rod Holder Is an Attachment Point
It doesn't have to be a gunnel rod holder. If there's a rod holder, the mount works:
- Gunnel rod holders along the cockpit
- Leaning post rod holders behind the helm
- Rocket launcher rod holders
- Flybridge rod holders
- Fighting chair rod holders
Rod holders are set at different angles: 0°/vertical, 15°, 30° and everything in between. The mount adjusts to any of them and always sets the table flat.
What's Wrong With How Most Fishing Boats Handle Drinks
- The cooler lid and leaning post end up doing the table's job
- Clip-on plastic holders that flex, crack or rust in the salt
- Shallow holders that won't hold a 30 oz tumbler when you're running
- Bottles rolling in the gunnel every time you hit a wake
- Phones, pliers and sunscreen sliding from one side of the cockpit to the other
- No table at all, or a factory one that's flat, flimsy and in the way
How the Adjustable Rod Holder Mount Works
- Drop it in. The mount slides into a standard rod holder.
- Level it. Adjust the angle until the table sits flat, whatever angle the holder is at.
- No drilling. It uses the rod holders already on your boat.
- Out in seconds. Lift it out when you need the rod holder back for fishing.
- One top, many mounts. The Butler top also fits our pontoon rail, pedestal and SeaSucker mounts, and the Utility top fits the rail and pedestal mounts, so a table can move between setups.
Where to Put It on Your Boat
| Rod holder | Best for |
|---|---|
| Gunnel | A cockpit table for the crew, the sandbar or the dock |
| Leaning post | The captain's and crew's drinks within reach underway |
| Rocket launcher | Up and out of the cockpit, leaving the deck open |
| Flybridge | Drinks and phones for the flybridge crew |
| Fighting chair | The angler's drink, gloves and sunglasses close by |
Lots of crews run more than one: a table in the cockpit and a cup holder caddy at the leaning post or flybridge.
Butler, Utility or a Caddy?
Both tables are about 25" × 19", cut from King StarBoard with a bump rail and non-slip marine decking.
Docktail Butler with Rod Holder Mount is the drink and gear table. Deep slots hold tumblers, cans, bottles and party cups, even in chop. It has spots for a cutting board and paring knives, plus room for snacks, sunscreen and phones. It also comes in solid black Midnight Series.
Docktail Utility with Rod Holder Mount is the serving table. Its 22" × 13" flat area fits two full-size plates or big bowls. It has two tumbler holders for 20 and 30 oz tumblers with handle cutouts, a knife holder, a bottle opener slot and an enclosed catch-all for sunglasses and phones. It also comes in Midnight Series.
Docktail Boat Table Caddy with Adjustable Rod Holder Mount is the bar caddy, at 19¼" × 14¾". It has two slots for 1.75 L bottles, two large slots for snack bowls or the removable cutting board insert, three center slots for 12 oz cans, bottles or small party cups, and back slots for 2-liter sodas, insulated tumblers and 1-liter bottles.
Docktail Cup Holder Caddy with Rod Holder Mount is the compact option, at 18" × 5" × 7". It holds cups, tumblers and bottles plus phones and small gear, for spots where a full table won't fit.
Our pick: The Butler is the best all-around table for most boats. Get the Utility if you eat on board or want a real serving surface. Add a Cup Holder Caddy at the leaning post or flybridge so drinks are covered everywhere.
Fishing Day or Sandbar Day
On a fishing or tournament day, the table becomes the crew's station. It holds drinks, sunglasses, phones, gloves, sunscreen and leader material, and keeps all of it off the gunnels and seats. Put it where it won't get in the way of the rods or the angler, and keep bait and hooks off it.
At the sandbar or the dock, the same table turns into the bar. It has drinks in the deep holders, snacks on the flat area and phones in the catch-all. When it's time to fish again, it lifts right out.
Make It Yours
Pick two marine decking colors from 3,000 combinations to match your upholstery, hull stripe or cockpit, then add your boat's name in one of four fonts. We send a proof for you to approve before we engrave. Custom colors and names take about 4 weeks.
Why Docktail Bar
- Made in Florida, USA since 2014, from marine-grade King StarBoard and stainless hardware
- Fits any rod holder at any angle, with no drilling
- Free mount exchange if you order the wrong one, as long as it's unused
- 90-day "Love It or Return It" guarantee, and free shipping over $150
Frequently Asked Questions
Will it fit my rod holders?
Yes. The mount fits standard rod holders anywhere on the boat, including gunnel, leaning post, rocket launcher, flybridge and fighting chair rod holders.
My rod holders are angled. Will the table sit level?
Yes. The mount adjusts to any angle, including 0°/vertical rod holders, and sets the table flat.
Do I need to drill anything?
No. It drops into the rod holders you already have.
Can I leave it in while we're running?
Yes. It's designed to stay locked in at a reasonable speed for the sea conditions, and the deep holders keep drinks in place.
Can I use the same table on another boat or mount?
Yes. The Butler top also fits our pontoon rail, pedestal and SeaSucker mounts. The Utility top fits our rail and pedestal mounts.
Can I add my boat's name?
Yes. Pick your colors and a font, approve the proof, and allow about 4 weeks.
Cheers, and hope to sea you on the water!
Steve & Amber Fill, Docktail Bar
